Monday, 3 August 2009

Enabling AHCI after installing Windows XP x64

Download the OS Pre-Install sata drivers and extract to a temporery location on the machine (c:\tmp).

Open Device Manager
under IDE ATA/ATAPI controllers you should see something like : Intel ICH9 Serial ATA Storage Controller.
Right-Click on that and select Update Driver
Say no to connecting to Windows Update to search, hit Next
Select Install from a list or specific location (Advanced), hit Next
Select "Don't search. I will choose the driver to install", hit Next
Select Have Disk
Browse to the Driver folder (c:\tmp\) and highlight the iastor.inf file, hit Open Select OK

Now you should have a list of controllers ICH9 /AHCI driver
You'll get warned that installing the device driver is not recommended, click Yes to continue installing
Click Finish
If you have more than one Intel ICH9 Serial ATA Storage Controller you will need to do this for each before restarting
When system boots enter the bios, navigate to the SATA Operation option or equivlant and set it to AHCI
Verify your sata ports enabled, save changes and exit.
After you log into Windows, your computer will find the "new" hardware. Wait until you get the popup message to restart your computer, say Yes to restart one last time.

1 comment:

  1. You just saved my life with this guide! I've spent the last 4 hours trying to figure out how to enable this on my VPS Server in Hong Kong and I just couldn't figure it out for the life of me. But now I did - thanks to you!